A jet pulverizer can process the material. It can reduce the average particle size to 1-45 microns. And, you can adjust the particle size range. It is an indispensable processing equipment in the battery material industry. So the question is, to what extent can the jet pulverizer crush it? It is related to the following factors:
1. The initial fineness of the raw materials. The jet mill generally requires the feed to be below 50 mesh.
2. It is about the material’s physical properties. These include its fluidity and the evenness of its particles. Some materials have poor fluidity, many impurities, and high solvent content. There may be material blocking during the production process. In this case, special equipment is needed. Not all materials can be crushed with standard equipment to a fineness. .
3. It is related to the crushing pressure during the crushing process. Some equipment has higher feeding pressure than crushing pressure. Other equipment has higher crushing pressure than feeding pressure. Specific materials require specific design.
4. It is related to the feeding speed. Not all materials have good fluidity. Screw feeding and vibration feeding are both important. The feeding process is a key factor. Some very fine materials are difficult to feed. , at this time, special personalized configuration is needed to achieve the feeding effect.
5. It has something to do with the optimization degree of the airflow pulverizer. Many manufacturers make airflow pulverizers. But, the fineness they produce varies. This is true even for the same material and for different models from the same manufacturer. There are also differences. However, experience shows that a larger crushing disk is better than a smaller one.
6. It is related to the proficiency of the operator and the operation method. Some equipment requires small and then large pressure to start. Some require direct one-step operation.
As can be seen from the above, the fineness of the jet mill is not fixed, but adjustable. This is why it has become a favored processing equipment in many industries. It can meet the needs of different users.
